Harley Davidson Exhaust Torque Specs

Angle Intake Lift Exhaust Lift Intake Lift TDC Exhaust Lift TDC RPM Low RPM High Min.
Harley davidson exhaust torque specs. On the topic of chassis characteristics responsible for road holding. 1016 mm Piston displacement - approx 88 cu. Fastener Size - Torque ft.
10 - 22 in. To start front jug top 9-18 in lbs then bottom to 100-120 in lbs then back to top tighten to 100-120 in lbs. 1450 cc Compression ratio - 901 Combustion chamber - 5187 cu.
9525 mm Stroke - 400 in. 14 - 10 ft. Step 6 Raise the exhaust pipes back up and thread the head bolts and rear mounting bolts into position.
Tighten the top nut of the front cylinder head exhaust flange to 9-18 in-lbs 1-2 Nm then tighten the bottom nut to 100-120 in-lbs 113-136 Nm final tighten the top nut to 100-120 in-lbs 113-136Nm then tighten the bottom nut of the rear cylinder head exhaust flange to 9-18. The engine produces a maximum peak output power of and a maximum torque of 10200 Nm 104 kgf-m or 752 ftlbs 3400 RPM. I always check the torque values after everything is bolted up too.
With this drive-train the Harley-Davidson FXDWGI Dyna Wide Glide is capable of reaching a maximum top speed of. Exhaust Open Exhaust Close Intake Duration Exhaust Duration Overlap Intake Lobe Center Exhaust Lobe Center Lobe Sep. As such there is no universal torque specification for aluminum wheels that a vehicle owner should follow.
The engine produces a maximum peak output power of 10000 HP 730 kW 5020 RPM and a maximum torque of 16543 Nm 169 kgf-m or 1220 ftlbs 3000 RPM. Joined May 14 2011. Be careful theyre not.