Harley Davidson Grip Removal

The left grip is generally glued to the bar and some of the 1996-newer grips are clamped within the left control button pod or both clamped and glued.

Harley davidson grip removal. If you appreciate this free video consider supporting us by purchasing these grips or any other items through our Revzilla Affiliate Link. If the seal cap is still fastened to the index pins inside the old throttle grip it. Remove the old throttle grip from the handlebars and clean the area it covered.

To remove the grip a slight tug may be necessary to release the index pins in the grip from the receptacle in the seal cap. Compressed air is your friend but sneaking a thin screw driver under the grip. How to Replace Grips on a Harley-Davidson by JP Cycles.

Reinstall the switch housing by tightening the T25 screws. I will leave a link below for the Avon grips that I used. We show you in great detail how to install Harley-Davidson brand heated grips on your Harley.

You can do it right in your garage on the kickstand with no specialty tools. Upon removing the grip check the location of the seal cap. Remove the grip from the handlebar.

Carburetor cleaner between the grip and the handlebar. The carb cleaner should breakdown the old adhesive so you can twist off the old grip. Save you money and let us show you how to do this so you dont have to pay a mechanic.

Once aligned remove the grip and apply adhesive to the inside of the grip. VIDEO-In this DIY video we show you how to easily install new basic handgrips on your Harley Davidson motorcycle. You can also use compressed air to try to break the adhesive bond.